2个回答
vpdn enable（开启vpdn）vpdn-group tylrequest-dialinprotocol pppoe（启用pppoe协议） interface Ethernet0no ip addresspppoe enablepppoe-client dial-pool-number 1（将物理端口和虚拟拨号端口绑定）interface Ethernet1 内网接口ip address 192.168.1.254 255.255.255.0ip nat insideinterface Dialer1ip address negotiatedip mtu 1492 (将原来的mtu1500变为1492，因pppoe 的包头是8个字节）ip nat outsideencapsulation pppdialer pool 1 （通过拨号池，将物理端口和虚拟拨号端口绑定）ppp pap sent-username ******@163.gd password 0 ******（ppp pap的单向验证）ip nat inside source list 1 interface Dialer1 overload（NAT转换）ip route 0.0.0.0 0.0.0.0 Dialer1（设置静态路由）access-list 1 permit any
sh ip routing Vlan 110 name whs exit int vlan 110