1个回答
system nat address-group 1 x.x.x.x x.x.x.x acl number 3000 rule 0 permit ip source 10.0.0.0 0.0.0.255interface Ethernet0/1 ip address 10.0.0.1 255.255.255.0int eth0/0ip add x.x.x.x x.x.x.x 外网IP+掩码 nat outbound 3000 address-group 1ip route-static 0.0.0.0 0.0.0.0 X.X.X.X 外网网关nat address-group 边跟需要转换成外网地址范围某接口下啥命令配置上请用QUIT退出